
1.877.817.6028
www.DiodeLED.com
INSTALLATION GUIDE
2 OF 4
DAZZLE 24
™
24V RGBW LED TAPE LIGHT
®
A. Cut the tape at the line indicated with the scissors icon.
B. Determine a nished, smooth surface, away from direct sunlight for
mounng. Clean surface and let dry.
C. Remove adhesive paper from the tape light to expose 3M™ adhesive.
Prior to installaon, verify all components are a compable system. Congure and pre-test your LED system prior to permanent installaon to ensure all
components are operang correctly. Install in accordance with the NEC and local regulaons.
Installation
WARNING
Shock Hazard. May result in serious injury or death.
Turn OFF High Voltage AC Power at the main breaker.
ON
OFFOFFOFF
ONON
OFFOFF
ONON
IG082514-1.3
Determine Locaons to Install 3 Main Components. Refer to
the ‘System Diagrams.’
Aach Color Controller and Driver. Only use copper wiring.
Reference ‘Wiring Connecons’ located further in guide for
visual. Verify a compable constant voltage driver is installed.
Review the full system. Ensure all polaries are correct and
connecons are secured.
Install Addional Components, Verify Connecons, and Turn
Main Power ON at Breaker.
Prior to cung tape light, refer to ‘RGBW CLICKTIGHT™
Connectors’ on page 3 for connecon informaon.
Mount tape to desired surface.
1) Driver 2) RGBW Color
Controller
3) Fixture
D. Adhere tape to surface, working one end to the other to prevent
air pockets and raised secons. Ulize a clean rag between skin and
tape to resist oil transfer from skin to LEDs. Connue following the
remaining installaon instrucons.
ON
OFFOFFOFF
ONON
OFFOFF
ONON
Cut points not drawn to scale.
Comentários a estes Manuais