Diode-led DMX 8-Way Splitter Manual do Utilizador descarregar pdf (Página 2)

1.877.817.6028

www.DiodeLED.com

INSTALLATION GUIDE

[email protected] www.DiodeLED.com

2 OF 2

DMX 8-WAY SPLITTER

Visit the on-line product page at www.DiodeLED.com for addional product specicaons & warranty informaon.

• DMX 8-WAY SPLITTER Specicaon Sheet

For full specicaons.

• Voltage Drop Charts

Use to specify appropriate wire gauge for installaon. Available at the ‘Tools & Resources’ page at www.DiodeLED.com.

Additional Resources

QUESTIONS?

Visit www.DiodeLED.com or contact Customer Support at inf[email protected]

or 1.877.817.6028 Monday through Friday, 7:00am - 5:00pm PST.

Wiring Connections

1 2

Input From

12-24V Driver

DMX-512 Output

(8x Female XLR-3 Connections)

DMX-512 Input

(Male XLR-3 Connection)

(Requires Male DC Plug, 5.5 x 2.1mm)

Pin 1: Ground

Pin 2: Data -

Pin 3: Data +

DO NOT connect directly to 120VAC. Install in accordance with the NEC, and local regulaons.

IG061714-1.1

Troubleshooting

LED xture responding incorrectly

• Ensure all wiring connecons are correct. Reversing the Data + and Data - will cause lights to icker

and not respond to controller:

• Check power connecons of all components (drivers, DMX decoders/xtures, DMX controller).

• Ensure a compable constant voltage driver is installed.

• Ensure the driver and DMX xture have the same voltage specicaons (12V & 12V, or 24V & 24V).

Fixture is ashing or ickering

• Verify a compable constant voltage driver is installed.

• Ensure all connecons are properly secured.

Prior to troubleshoong, ensure a compable system is installed. Verify compable xtures, drivers, controls and addional components were specied correctly.

1 2

1.877.817.6028 1
QUESTIONS? 2

Comentários a estes Manuais

Sem comentários

Diode-led DMX 8-Way Splitter Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Iluminação Diode-led DMX 8-Way Splitter